This is our new front Splitter Extension for the 15-22 Challenger SXT/RT splitter. Made of 3/8″ ABS black plastic with mat finish on the finished side and a smooth dimple finish on the bottom. This product is built to order, please note build lead times below. Comes with all hardware and instructions.

Made in the USA!

Product Fitment:

• 15-22 Challenger SXT/RT (NON-ScatPack)
• Will not work with SRT models with larger factory splitter

Shipping:

• This product has a 7-10 (M-F excluding holidays) business day build lead time before it will ship.

Splitter Install Guide:

This product will use factory locations with some new bolt locations that will need to be matched drilled and have a rivnut installed.

– Remove the (9) 7mm bolts from your factory splitter on the back side.

– Mount the new splitter to those 9 factory locations with the provided 4.2m 1 1/2″ screws and washers.

– Press the splitter against the vehicle and match drill forward locations with a 3/8″ drill bit.

– Remove the splitter from the vehicle and install the 4 provided rivnuts with a rivnut gun. Make sure the rivnuts are fully squished and installed.  

– Reinstall splitter from the rear bolts first than add the 1/4″-20 bolts and place spacers between the vehicle and splitter. 

– Tighten up all bolts and enjoy. 

Enter Our World of aerodynamics.